Rosemount Temperature Transmitter
Rosemount Temperature Transmitter
A temperature transmitter is an electrical instrument that interfaces a temperature gauge – such as a thermocouple, RTD, or thermistor – to a measurement or control device, such as a PLC, DCS, PC, loop controller, data logger, display or recorder.
Typically, temperature transmitters isolate, amplify, filter noise, linearize, and convert the input signal from the sensor then send (transmit) a standardized output signal to the control device. Common electrical output signals used in manufacturing plants are 4-20mA or 0-10V DC ranges. For example, 4mA could represent 0°C and 20mA means 100°C.
Rosemount 3144P Temperature Transmitter
The Rosemount 3144P Temperature Transmitter provides industry-leading accuracy, stability, and reliability for your temperature measurements. It features a dual-compartment housing to ensure reliability and advanced diagnostics to keep your measurement point up and running.
When combined with Rosemount X-well™ Technology and the Rosemount 0085 Pipe Clamp sensor, this transmitter can provide accurate measurement of process temperature, eliminating the need for a thermowell or process penetration.
The industry-leading Rosemount 3144P Single Point Temperature Transmitter delivers unmatched field reliability and innovative process measurement solutions and diagnostics Transmitter features include:
- Temperature measurement assembly with Rosemount X-well Technology (option code PT)
- Dual and single sensor input capabilities
- Transmitter-sensor matching (option code C2)
- Integral transient protector (option code T1)
- IEC 61508 Safety Certificate of Compliance (option code QT)
- Advanced sensor and process diagnostics (option codes D01 and DA1)
- Large, easy to read LCD display (option code M5)
- “Assemble to Sensor” option (option code XA)
technical specification
Material
- Aluminum
- Stainless steel
Connection Size
- ½–14-in. NPT
- M20 x 1,5 (CM20)
- PG 13.5 (PG11)
- JIS G ½
Transmitter output
- 4—20 mA with a digital signal based on HART Protocol
- FOUNDATION Fieldbus digital signal (includes three AI function block and backup link active scheduler)
Measurement Configuration
- Single-sensor input
- Dual-sensor input
Display
- The large LCD display with percent range graph and buttons/switchesDiagnostics
Calibration Options
- Transmitter-sensor matching (Callendar-Van Dusen constants), custom trim
Certifications/Approvals
- SIL 2/3 certified to IEC 61508 by an independent 3rd party, hazardous location, marine type, see full specs for a complete list of certifications
Data Sheet
Leave a Reply
Want to join the discussion?Feel free to contribute!