Description
Valve manifold Models IV30, IV31, IV50, IV51
3-valve manifold, models IV30 and IV31
The 3 – valve manifold consists of two shut-off valves and one pressure compensating valve.
The shut-off valves separate the process from the differential pressure measuring instrument.
The pressure compensating valve enables the compensation between ⊕ side and ⊖ side to avoid one-sided overpressure during commissioning and operation.
5-valve manifold, models IV50 and IV51
Compared to the 3-valve manifold, the 5-valve manifoldis equipped with two additional vent valves.
One vent valve per pressure side allows operators the targeted venting of one or both pressure sides of the measuring arrangement.
Through the non-rotating spindle tip, the wear of the sealing elements is reduced.
This results, particularly with frequent opening and closing, in a noticeable increase in the service life of the valve manifold.
Through the blow-out proof design of the valve, working safety is improved, especially in applications with high pressure loading.
As an option, WIKA offers the professional assembly of valves and pressure measuring instruments and also other accessories into a ready-to-install solution, also known as a hook-up.
To ensure the performance of the complete system, an additional leak test is carried out on the hook-up.
Material
Wetted parts
- Bonnet body, Spindle tip, Valve body: Stainless steel 316/316L
Non-wetted parts
- Handle: Stainless steel 304
Gland nut, Counter nut, Valve spindle, Seal bush: Stainless steel 316/316L
Process connection / instrument connection
- ½ NPTF / G ¼
- ½ NPTM / G ¼
- ½ NPTF / G ½
- ½ NPTM / G ½
Reviews
There are no reviews yet.